Products
-
Our seed holders are made of high purity Iridium material , and we can design and fabricate them depending on shape of seed crystal and holder axial.
-
A crucible is a container that can withstand very high temperatures and is used for metal, glass, and pigment production as well as a number of modern laboratory processes. While crucibles historically were usually made from clay, they can be made from any material that withstands temperatures high enough to melt or otherwise alter its contents
-
JINXING METAL.'s unique enhanced design sputtering targets are produced for use in the sputtering of precious metals and magnetic materials, thereby increasing target utilization. Through engineering design, the enhanced profile provides utilization factors far in excess of those conventionally found in planar designed targets.By taking the inverse of the erosion profile, thus increasing the target thickness in this area
-
JINXING METAL offers a complete line of sputtering targets ranging from commercial grade to highest purity, zone refined Ultra-Pure grade. These materials can be fabricated to fit all commercially available systems or to specific dimensions required for your particular applications. A number of metallurgical techniques are employed in PVD material fabrication.
-
Titanium 15-3-3-3 plate ASTM B265
ST=solution Treated. Beta alloy which is suitable for strip-rolling and heat-treating. Highly formable, good room temperature bending properties, solution treatment results in high strengths.
Applications: Aerospace, flat-rolled products, fasteners, foil, plate, tubing, castings and forgings. -
tungsten nickel copper alloy
Description:
Tungsten-nickel-copper alloy is made of tungsten, nickel, copper and other chemical elements in appropriate proportion. Alloys are mainly with over 85% tungsten and low amounts of nickel, copper, etc. The ratio of added nickel and copper is normally 3:2.WNiCu alloys are produced in processes of liquid phase sintering and added elements alloying, etc. Due to various characteristics and uses of the alloy, the compositions can be divided into main series of W-Ni-Fe, W-Ni-Cu, W-Co, W-WC-Cu, W-Ag, etc.Application:
1.WNiCu alloy is widely used in fields of aerospace, aviation, military and oil drilling;
2.It is also applied for electrical instrumentation, medical and industrial purpose;
3.WNiCu alloys can also used for producing balancing weights, high temperature moulds, electro-heat upsetting anvil block, the core of armour piercing shell and protection shields for high-energy rays.Features:
1.Tungsten-nickel-copper alloy has a high density of 16.8g/cm3 to 18.75g/cm3;
2.It has high tensile strength from 700 to 1000 MPa;
3.It owns strongly absorbed radiation capacity, which is about 30% to 40% higher than that of lead;
4.WNiCu alloy has large coefficient of thermal conductivity, which is five times higher than mold steel;
5.The coefficient of thermal expansion is fairy small. The coefficient only accounts for 1/3 to 1/2 of iron or steel’s;
6.Tungsten-nickel-copper alloy possesses good conductive property, high strength as well as good weldability and workability;
7.WNiCu alloy is a kind of non-magnetic metal.Parameters of WNiCu Alloys:
90-97% WNiCu alloy tube as high temperature mouldsProduct Show
Description:
Tungsten-nickel-copper alloy is made of tungsten, nickel, copper and other chemical elements in appropriate proportion. Alloys are mainly with over 85% tungsten and low amounts of nickel, copper, etc. The ratio of added nickel and copper is normally 3:2.WNiCu alloys are produced in processes of liquid phase sintering and added elements alloying, etc. Due to various characteristics and uses of the alloy, the compositions can be divided into main series of W-Ni-Fe, W-Ni-Cu, W-Co, W-WC-Cu, W-Ag, etc.
Application:
1.WNiCu alloy is widely used in fields of aerospace, aviation, military and oil drilling;
2.It is also applied for electrical instrumentation, medical and industrial purpose;
3.WNiCu alloys can also used for producing balancing weights, high temperature moulds, electro-heat upsetting anvil block, the core of armour piercing shell and protection shields for high-energy rays.Features:
1.Tungsten-nickel-copper alloy has a high density of 16.8g/cm3 to 18.75g/cm3;
2.It has high tensile strength from 700 to 1000 MPa;
3.It owns strongly absorbed radiation capacity, which is about 30% to 40% higher than that of lead;
4.WNiCu alloy has large coefficient of thermal conductivity, which is five times higher than mold steel;
5.The coefficient of thermal expansion is fairy small. The coefficient only accounts for 1/3 to 1/2 of iron or steel’s;
6.Tungsten-nickel-copper alloy possesses good conductive property, high strength as well as good weldability and workability;
7.WNiCu alloy is a kind of non-magnetic metal.
