Products
-
- Product name Niobium Part
- Grade RO4200, RO4210
- Application: electronics, metallurgy, chemical, hard alloy cutters, aerospace and aviation.
- Size: according to customer’s drawing or spec.
-
Grade: Hf+Zr;99.95%; Zr<2%Diameter : 0.125 to 4nch (3mm to 101.6mm).
-
Iridium wire used in spark plug, aircraft , lighting material, thermocouple wire etc.
Purity: 99.95%, Diameter 0.07mm/0.003inch min. Type Straight and coil. -
A crucible is a container that can withstand very high temperatures and is used for metal, glass, and pigment production as well as a number of modern laboratory processes. While crucibles historically were usually made from clay, they can be made from any material that withstands temperatures high enough to melt or otherwise alter its contents
-
JINXING METAL.'s unique enhanced design sputtering targets are produced for use in the sputtering of precious metals and magnetic materials, thereby increasing target utilization. Through engineering design, the enhanced profile provides utilization factors far in excess of those conventionally found in planar designed targets.By taking the inverse of the erosion profile, thus increasing the target thickness in this area
-
Grades: Grade 2, Grade 3, Grade 4, Grade 5 ELI
Standards: ASTM F67, ISO 5832-2, ASTM F136, ISO 5832-3
Size(mm): THK(0.5-20) mm
Standards: ASTM F67, ISO 5832-2, ASTM F136, ISO 5832-3
Application: Medical, surgical implant
-
Factory provided directly Titanium Grade 7 (ASTM B265 / ASTM B337 / ASTM B338/ ASTM B348) in sheet, plate, bar and tube.
Titanium Grade 7, (ASTM B265 / ASTM B337 / ASTM B338/ ASTM B348) Grade11 in sheet, plate, bar and tube. -
Tungsten nickel copper alloy price
Product Show
Description:
Tungsten-nickel-copper alloy is made of tungsten, nickel, copper and other chemical elements in appropriate proportion. Alloys are mainly with over 85% tungsten and low amounts of nickel, copper, etc. The ratio of added nickel and copper is normally 3:2.WNiCu alloys are produced in processes of liquid phase sintering and added elements alloying, etc. Due to various characteristics and uses of the alloy, the compositions can be divided into main series of W-Ni-Fe, W-Ni-Cu, W-Co, W-WC-Cu, W-Ag, etc.
Application:
1.WNiCu alloy is widely used in fields of aerospace, aviation, military and oil drilling;
2.It is also applied for electrical instrumentation, medical and industrial purpose;
3.WNiCu alloys can also used for producing balancing weights, high temperature moulds, electro-heat upsetting anvil block, the core of armour piercing shell and protection shields for high-energy rays.Features:
1.Tungsten-nickel-copper alloy has a high density of 16.8g/cm3 to 18.75g/cm3;
2.It has high tensile strength from 700 to 1000 MPa;
3.It owns strongly absorbed radiation capacity, which is about 30% to 40% higher than that of lead;
4.WNiCu alloy has large coefficient of thermal conductivity, which is five times higher than mold steel;
5.The coefficient of thermal expansion is fairy small. The coefficient only accounts for 1/3 to 1/2 of iron or steel’s;
6.Tungsten-nickel-copper alloy possesses good conductive property, high strength as well as good weldability and workability;
7.WNiCu alloy is a kind of non-magnetic metal.Parameters of WNiCu Alloys:
90-97% WNiCu alloy tube as high temperature mouldsProduct Show
Description:
Tungsten-nickel-copper alloy is made of tungsten, nickel, copper and other chemical elements in appropriate proportion. Alloys are mainly with over 85% tungsten and low amounts of nickel, copper, etc. The ratio of added nickel and copper is normally 3:2.WNiCu alloys are produced in processes of liquid phase sintering and added elements alloying, etc. Due to various characteristics and uses of the alloy, the compositions can be divided into main series of W-Ni-Fe, W-Ni-Cu, W-Co, W-WC-Cu, W-Ag, etc.
Application:
1.WNiCu alloy is widely used in fields of aerospace, aviation, military and oil drilling;
2.It is also applied for electrical instrumentation, medical and industrial purpose;
3.WNiCu alloys can also used for producing balancing weights, high temperature moulds, electro-heat upsetting anvil block, the core of armour piercing shell and protection shields for high-energy rays.Features:
1.Tungsten-nickel-copper alloy has a high density of 16.8g/cm3 to 18.75g/cm3;
2.It has high tensile strength from 700 to 1000 MPa;
3.It owns strongly absorbed radiation capacity, which is about 30% to 40% higher than that of lead;
4.WNiCu alloy has large coefficient of thermal conductivity, which is five times higher than mold steel;
5.The coefficient of thermal expansion is fairy small. The coefficient only accounts for 1/3 to 1/2 of iron or steel’s;
6.Tungsten-nickel-copper alloy possesses good conductive property, high strength as well as good weldability and workability;
7.WNiCu alloy is a kind of non-magnetic metal.Parameters of WNiCu Alloys:
